306 lines
11 KiB
C
306 lines
11 KiB
C
/**
|
|
* Copyright (c) 2016 - 2020, Nordic Semiconductor ASA
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice, this
|
|
* list of conditions and the following disclaimer.
|
|
*
|
|
* 2. Redistributions in binary form, except as embedded into a Nordic
|
|
* Semiconductor ASA integrated circuit in a product or a software update for
|
|
* such product, must reproduce the above copyright notice, this list of
|
|
* conditions and the following disclaimer in the documentation and/or other
|
|
* materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* 4. This software, with or without modification, must only be used with a
|
|
* Nordic Semiconductor ASA integrated circuit.
|
|
*
|
|
* 5. Any software provided in binary form under this license must not be reverse
|
|
* engineered, decompiled, modified and/or disassembled.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
|
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
|
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
#ifndef SDK_VALIDATION_H
|
|
#define SDK_VALIDATION_H
|
|
|
|
#include "nrf_peripherals.h"
|
|
#include "sdk_config.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
// Validate peripheral availibility
|
|
|
|
#if ((defined(SAADC_ENABLED)) && (SAADC_ENABLED > 0) && (!defined(SAADC_PRESENT)))
|
|
#error "SAADC not present in selected MCU."
|
|
#endif
|
|
|
|
#if ((defined(ADC_ENABLED)) && (ADC_ENABLED > 0) && (!defined(ADC_PRESENT)))
|
|
#error "SAADC not present in selected MCU."
|
|
#endif
|
|
|
|
#if ((defined(I2S_ENABLED)) && (I2S_ENABLED > 0) && (!defined(I2S_PRESENT)))
|
|
#error "I2S not present in selected MCU."
|
|
#endif
|
|
|
|
#if ((defined(COMP_ENABLED)) && (COMP_ENABLED > 0) && (!defined(COMP_PRESENT)))
|
|
#error "COMP not present in selected MCU."
|
|
#endif
|
|
|
|
#if ((defined(LPCOMP_ENABLED)) && (LPCOMP_ENABLED > 0) && (!defined(LPCOMP_PRESENT)))
|
|
#error "LPCOMP not present in selected MCU."
|
|
#endif
|
|
|
|
#if ((defined(SPIS0_ENABLED)) && (SPIS0_ENABLED > 0) && (!defined(SPIS_PRESENT)))
|
|
#error "SPIS0 instance not present in selected MCU."
|
|
#endif
|
|
|
|
#if ((defined(EGU_ENABLED)) && (EGU_ENABLED > 0) && (!defined(EGU_PRESENT)))
|
|
#error "EGU instance not present in selected MCU."
|
|
#endif
|
|
|
|
#if ((defined(NFC_HAL_ENABLED)) && (NFC_HAL_ENABLED > 0) && (!defined(NFCT_PRESENT)))
|
|
#error "NFC TAG not present in selected MCU."
|
|
#endif
|
|
|
|
// Validate count of instances
|
|
|
|
#if ((defined(RTC2_ENABLED)) && (RTC2_ENABLED > 0) && (RTC_COUNT < 2))
|
|
#error "RTC2 not present in selected MCU."
|
|
#endif
|
|
|
|
#if ((defined(TWIS0_ENABLED) || defined(TWIS1_ENABLED)) &&\
|
|
((TWIS0_ENABLED + TWIS1_ENABLED) > 0) &&\
|
|
(!defined(TWIS_PRESENT)))
|
|
#error "TWIS not present in selected MCU."
|
|
#endif
|
|
|
|
#if ((defined(SPIS2_ENABLED)) && (SPIS2_ENABLED > 0) && (SPIS_COUNT < 2))
|
|
#error "SPI2/SPIS2 instance not present in selected MCU."
|
|
#endif
|
|
|
|
#if ((defined(TIMER3_ENABLED) || defined(TIMER4_ENABLED)) &&\
|
|
((TIMER3_ENABLED + TIMER4_ENABLED ) > 0) &&\
|
|
(TIMER_COUNT < 5))
|
|
#error "TIMER3 and TIMER4 not present in selected MCU."
|
|
#endif
|
|
|
|
// Validate peripheral sharing feature
|
|
#if !NRFX_CHECK(NRFX_PRS_ENABLED)
|
|
|
|
#if ((defined(TWIM0_ENABLED) && defined(TWIS0_ENABLED)) &&\
|
|
((TWIM0_ENABLED + TWIS0_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIM0, TWIS0 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIM0_ENABLED) && defined(SPIM0_ENABLED)) &&\
|
|
((TWIM0_ENABLED + SPIM0_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIM0, SPIM0 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIM0_ENABLED) && defined(SPIS0_ENABLED)) &&\
|
|
((TWIM0_ENABLED + SPIS0_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIM0, SPIS0 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIM0_ENABLED) && defined(SPI0_ENABLED)) &&\
|
|
((TWIM0_ENABLED + SPI0_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIM0, SPI0 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIM0_ENABLED) && defined(TWI0_ENABLED)) &&\
|
|
((TWIM0_ENABLED + TWI0_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIM0, TWI0 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIS0_ENABLED) && defined(SPIM0_ENABLED)) &&\
|
|
((TWIS0_ENABLED + SPIM0_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIS0, SPIM0 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIS0_ENABLED) && defined(SPIS0_ENABLED)) &&\
|
|
((TWIS0_ENABLED + SPIS0_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIS0, SPIS0 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIS0_ENABLED) && defined(SPI0_ENABLED)) &&\
|
|
((TWIS0_ENABLED + SPI0_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIS0, SPI0 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIS0_ENABLED) && defined(TWI0_ENABLED)) &&\
|
|
((TWIS0_ENABLED + TWI0_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIS0, TWI0 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(SPIM0_ENABLED) && defined(SPIS0_ENABLED)) &&\
|
|
((SPIM0_ENABLED + SPIS0_ENABLED) > 1))
|
|
#error "Peripherals overlap. SPIM0, SPIS0 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(SPIM0_ENABLED) && defined(SPI0_ENABLED)) &&\
|
|
((SPIM0_ENABLED + SPI0_ENABLED) > 1))
|
|
#error "Peripherals overlap. SPIM0, SPI0 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(SPIM0_ENABLED) && defined(TWI0_ENABLED)) &&\
|
|
((SPIM0_ENABLED + TWI0_ENABLED) > 1))
|
|
#error "Peripherals overlap. SPIM0, TWI0 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(SPIS0_ENABLED) && defined(SPI0_ENABLED)) &&\
|
|
((SPIS0_ENABLED + SPI0_ENABLED) > 1))
|
|
#error "Peripherals overlap. SPIS0, SPI0 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(SPIS0_ENABLED) && defined(TWI0_ENABLED)) &&\
|
|
((SPIS0_ENABLED + TWI0_ENABLED) > 1))
|
|
#error "Peripherals overlap. SPIS0, TWI0 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(SPI0_ENABLED) && defined(TWI0_ENABLED)) &&\
|
|
((SPI0_ENABLED + TWI0_ENABLED) > 1))
|
|
#error "Peripherals overlap. SPI0, TWI0 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIM1_ENABLED) && defined(TWIS1_ENABLED)) &&\
|
|
((TWIM1_ENABLED + TWIS1_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIM1, TWIS1 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIM1_ENABLED) && defined(SPIM1_ENABLED)) &&\
|
|
((TWIM1_ENABLED + SPIM1_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIM1, SPIM1 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIM1_ENABLED) && defined(SPIS1_ENABLED)) &&\
|
|
((TWIM1_ENABLED + SPIS1_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIM1, SPIS1 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIM1_ENABLED) && defined(SPI1_ENABLED)) &&\
|
|
((TWIM1_ENABLED + SPI1_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIM1, SPI1 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIM1_ENABLED) && defined(TWI1_ENABLED)) &&\
|
|
((TWIM1_ENABLED + TWI1_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIM1, TWI1 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIS1_ENABLED) && defined(SPIM1_ENABLED)) &&\
|
|
((TWIS1_ENABLED + SPIM1_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIS1, SPIM1 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIS1_ENABLED) && defined(SPIS1_ENABLED)) &&\
|
|
((TWIS1_ENABLED + SPIS1_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIS1, SPIS1 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIS1_ENABLED) && defined(SPI1_ENABLED)) &&\
|
|
((TWIS1_ENABLED + SPI1_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIS1, SPI1 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(TWIS1_ENABLED) && defined(TWI1_ENABLED)) &&\
|
|
((TWIS1_ENABLED + TWI1_ENABLED) > 1))
|
|
#error "Peripherals overlap. TWIS1, TWI1 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(SPIM1_ENABLED) && defined(SPIS1_ENABLED)) &&\
|
|
((SPIM1_ENABLED + SPIS1_ENABLED) > 1))
|
|
#error "Peripherals overlap. SPIM1, SPIS1 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(SPIM1_ENABLED) && defined(SPI1_ENABLED)) &&\
|
|
((SPIM1_ENABLED + SPI1_ENABLED) > 1))
|
|
#error "Peripherals overlap. SPIM1, SPI1 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(SPIM1_ENABLED) && defined(TWI1_ENABLED)) &&\
|
|
((SPIM1_ENABLED + TWI1_ENABLED) > 1))
|
|
#error "Peripherals overlap. SPIM1, TWI1 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(SPIS1_ENABLED) && defined(SPI1_ENABLED)) &&\
|
|
((SPIS1_ENABLED + SPI1_ENABLED) > 1))
|
|
#error "Peripherals overlap. SPIS1, SPI1 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(SPIS1_ENABLED) && defined(TWI1_ENABLED)) &&\
|
|
((SPIS1_ENABLED + TWI1_ENABLED) > 1))
|
|
#error "Peripherals overlap. SPIS1, TWI1 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(SPI1_ENABLED) && defined(TWI1_ENABLED)) &&\
|
|
((SPI1_ENABLED + TWI1_ENABLED) > 1))
|
|
#error "Peripherals overlap. SPI1, TWI1 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(SPI2_ENABLED) && defined(SPIS2_ENABLED)) &&\
|
|
((SPI2_ENABLED + SPIS2_ENABLED) > 1))
|
|
#error "Peripherals overlap. SPI2, SPIS2 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(SPIM2_ENABLED) && defined(SPIS2_ENABLED)) &&\
|
|
((SPI2_ENABLED + SPIS2_ENABLED) > 1))
|
|
#error "Peripherals overlap. SPIM2, SPIS2 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#if ((defined(SPIM2_ENABLED) && defined(SPI2_ENABLED)) &&\
|
|
((SPI2_ENABLED + SPIS2_ENABLED) > 1))
|
|
#error "Peripherals overlap. SPIM2, SPI2 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#endif // !NRFX_CHECK(NRFX_PRS_ENABLED)
|
|
|
|
#ifdef NFCT_PRESENT
|
|
|
|
#if ((defined(NFC_HAL_ENABLED) && defined(NRF_CLOCK_ENABLED)) &&\
|
|
((NFC_HAL_ENABLED) && (!NRF_CLOCK_ENABLED)))
|
|
#error "NFC_HAL requires CLOCK to work. NFC_HAL can not be enabled without CLOCK."
|
|
#endif
|
|
|
|
#if ((defined(NFC_HAL_ENABLED) && defined(TIMER4_ENABLED)) &&\
|
|
((NFC_HAL_ENABLED + TIMER4_ENABLED) > 1))
|
|
#error "TIMER4 is used by NFC_HAL. NFC_HAL, TIMER4 - only one of these can be enabled."
|
|
#endif
|
|
|
|
#endif
|
|
// Complex driver validation
|
|
#ifdef LPCOMP_PRESENT
|
|
|
|
#if ((defined(COMP_ENABLED) && defined(LPCOMP_ENABLED)) && \
|
|
(!NRFX_CHECK(NRFX_PRS_ENABLED)) && \
|
|
((COMP_ENABLED + LPCOMP_ENABLED) > 1))
|
|
#error "Peripherals overlap. COMP, LPCOMP - only one of these can be enabled."
|
|
#endif
|
|
|
|
#endif
|
|
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // SDK_VALIDATION_H
|